Cast Prototyping and Precise Cast Prototyping, and the PCPro Technique

(SANEPR.com) July 15, 2008 -- Hobart, Washington USA (SanePR) July 15, 2008

The Cast Prototyping and Precise Cast Prototyping is a new webpage that was just added to the new Rapid Prototyping Information Website that has just been released. This new PCPro Technique Process webpage has all of the information you need to know on Cast Prototyping and PCPro Technique and the main information you need to know on Cast Prototyping. You can visit this Cast Prototyping webpage at: Cast Prototyping.

Here is an excerpt from the new Cast Prototyping and PCPro Technique webpage:

“Researchers have developed a new rapid-prototyping technique that blends traditional casting methods with CNC milling which allows faster prototyping; the best thing is that it happens in a single machine. The technique is christened as “Precise Cast Prototyping” or PCPro and was developed by researchers at the Fraunhofer Institute For Material and Beam Technology, Dresden, Germany. Half of the mold is machine using CNC machining, then silicon or polyurethane material is poured into fill half the mold, this will be the lower half to render the shape of one half of the part, while the part still in the CNC mill. When the material is cured and hardened, the upper side of the component is milled. The process is targeted at components with simple geometry such as housings whose one side can be fairly easily machined on aluminum or epoxy mold half and the other complicated half is on the opposite side where it can be milled into the soft plastic. “

The new Cast Prototypes page is free information to members and non-members and can be found at: PCPro Technique. However, users of Prototype Zone who decide to be members can join for free and receive two free E-Books on Rapid Prototyping for a limited time offer. Prototype Zone will be adding new information all the time on Rapid Prototyping so check back often in the forum and blog for the latest information at: Rapid Prototyping.

About Prototype Zone: Prototype Zone is the leading information source and community website for all things about Prototyping and Rapid Prototyping. Visit the website to join for free and receive two free ebooks on Rapid Prototyping for a limited time offer.